Eesti BMW Klubi

Sõidu ajal lõi põlema sellise märgi nagu hüiumärk keskel ja selle ümber punane u.oskab keegi aidata mida see tähendab või kust saab vaadata märkide tähendusi?

Pakun, et see on rehvirõhu , e.tühja rehvi hoiatus. Auto on tuvastanud samal teljel erinevad rehvirõhud.

1 - Tire Failure Indicator RDW (not displayed on cluster if CCC/CID equipped)
Initialization must be performed immediately after correcting the tire pressure, a tire
change or a wheel change.
The following procedure must be performed to initialize the system:
1. Start the engine but do not drive off.
2. Press the rocker switch on the steering column stalk until the "initializing tire failure
indicator" function is shown in the instrument cluster.
3. Confirm the display by briefly pressing the BC button on the steering column stalk.
4. Press and hold the BC button on the steering column stalk for approx. 5 seconds
until the RDW display lights up in the instrument cluster. The tire failure indicator is
now ready for initialization. If no tick is shown in the display, this indicates that the
tyre failure indicator cannot be initialized due to a fault.
5. Release the BC button to conclude initialization.

http://www.shrani.si/f/3K/oQ/2K4i1eeI/e ... mation.pdf" onclick="window.open(this.href);return false;